XHD51
6 Ton Hydraulic Form Crimp Head for Use with HD51 Dies
$1,668.58
Mil P/N
: QPL Pending
- M5259/4-01 QPL Pending
- Uses HD51 series dies
- WIRE RANGE: #12 to #2/0 AWG
The XHD51 remote hydraulic crimp head is the preferred solution for high-volume applications on production lines and maintenance
rework centers. The crimp head can be mounted in a stationary position with a bench mount (Part # XHD51-BM), or used as a
hand-held tool. A powered or manual pump provides hydraulic power to the remote crimping head.
- Crimping Capabilities: insulated and uninsulated terminals and splices size 8 through 2/0 AWG.
- Crimp Force: 6 Tons (58.83 kN)
- L x W x H: 9 x 2 x 2.75 (in) 180.3 x 50.8 x 69.85 (mm)
- Weight 3.85 pounds (1.74 kg)
The recommended hydraulic pump is the HPU11M air over the hydraulic-powered pump. Daniels also manufactures 2 manual hydraulic pumps HPU15M (foot pump) and HPU12M (hand pump) as well as a battery-powered pump, HPU13M. Other specifications that apply to the XHD51 are the following:
| Crimp Applications | Machined Contacts, Insulated Terminals, Uninsulated Terminals, Splices, Coax Connectors & HEX, Stamped & Formed Contacts |
|---|---|
| Crimp Tool Type | HD Tools |
| Dies | HD51 |
| Power Type | Hydraulic |
| Shipping Weight | 4.0 |
Write Your Own Review
Related Products