.250" Two-Step Banding Tool (M81306/2-01A)
DMC’s Two-Step Banding Tools are designated for M85049/128- 1, M85049/128-2, M85049/128-5 and M85049/128-6 “welded buckle” bands. These tools tension and cut the band and leave an extended cut off tab. The second step provides an extra level of security by utilizing a roll-over tool to bend the cut-off tab over a full 180 degrees in a second operation.
DBS-1100 is the .250 Wide Band Application Tool M81306/2-01A
.125" One-Step Banding Tool (M81306/2-02B)
DMC’s Two-Step Banding Tools are designated for M85049/128- 1, M85049/128-2, M85049/128-5 and M85049/128-6 “welded buckle” bands. These tools tension and cut the band and leave an extended cut off tab. The second step provides an extra level of security by utilizing a roll-over tool to bend the cut-off tab over a full 180 degrees in a second operation.
DBS-1200 is the .125 Wide Band Application Tool M81306/2-02A
Verification of Two-Step EMI/RFI Band Tools M81306/2-01E & M81306/2-01F
DMC’s Two-Step Band Application Tools may be adjusted and verified to insure correct band tension. In order to make this operation simple and efficient for field use, DMC designed a compression fixture system which uses a Go/No-Go Gage to measure the tool tension. Ordering information for the field verification equipment (Part Numbers DBS-CG2A and DBS-CG3A) can be found in the chart below.
It is recommended to check the tension periodically, and if it needs adjustment.
| MILITARY P/N | DMC P/N | DESCRIPTION | WIDTH | APPLICATION |
|---|---|---|---|---|
| M81306/2-01 | DBS-1101 | Two-Step Installation Tool and Roll-Over Tool | .250 | M85049/128-1 & -2 |
| M81306/2-02 | DBS-1201 | Two-Step Installation Tool and Roll-Over Tool | .125 | M85049/128-5 & -6 |
| M81306/2-01A | DBS-1100 | Two-Step Band Tool | .250 | M85049/128-1 & -2 |
| M81306/2-02B | DBS-1200 | Two-Step Band Tool | .125 | M85049/128-5 & -6 |
| M81306/2-01C | DBS-RO3 | Roll Over Tool | .250 | M85049/128-1 & -2 |
| M81306/2-02D | DBS-RO5 | Roll Over Tool | .125 | M85049/128-5 & -6 |
| M81306/2-01E | DBS-CG2A | Tension Verification Gage & Compression Fixture | .250 | DBS-1100 |
| M81306/2-02F | DBS-CG3A | Tension Verification Gage & Compression Fixture | .125 | DBS-1200 |