PMBT1200

Pneumatic Banding Tool for .125 Wide Welded EMI/RFI Shield Bands
$5,612.40

EMI/RFI Band Application System for M85049/128 Shield Termination Bands.

The PBT1100 & PMBT1200 series Pneumatic Band Application
Tools are lightweight, dependable, and easy to operate. Many of
the components are interchangeable with the corresponding hand
tool. DMC’s Pneumatic Two-Step Banding Tools are compatible
with all currently available bands to M85049/128.

PMBT1200 .125 Wide Band Application Tool:
• Size:  8.75” L
• Weight:  1.52 lbs.
• Tension Range:  70-90 lbs.

A hand operated version of this tool is available, P/N:  DBS-1200.

Work with the DBS-R05 (M81306/2-02D) Roll Over Tool for .125 Wide Bands.

Verification of Two-Step EMI/RFI Band Tools:

DMC’s Two-Step Band Application Tools may be adjusted and verified to insure correct band tension. In order to make this operation simple and efficient for field use, DMC designed and patented a compression fixture system (DBS-CG3A) which uses a Go/No-Go Gage to measure the tool tension.

The DBS-CG1 Laboratory Calibration Instrument will allow the operator to measure the exact tension produced by the tool.

A free-standing holding fixture is available (DBS-CG1-F) to aid the calibration process by securing the DBS-CG1 and banding
tool in place. The DBS-CG1-F holding fixture secures the banding tool in place during calibration. This fixture only works with the Two-Step Tools and DBS-CG1 Calibration Instrument (Banding tools and DBS-CG1 are sold separately.)

Sold with banding calibration certificate (calibration with reading) traceable to NIST. Additional calibration certificates can be purchased using the dropdown option above.

More Information
Band TypeWelded
Band Width0.125
Power TypePneumatic
NSN3.54002E+12
Shipping Weight5.6
Data Sheet (108.45 kB)
Banding Literature (674.47 kB)
Write Your Own Review
Leave a Review
You're reviewing:PMBT1200
Your Rating
© 2023 by Daniels Manufacturing Corporation. All rights reserved.