Large Gage Hydraulic Crimp Tool
- Hand Actuated Hydraulic Crimp Tool
- Interchangeable MS23002-xx Dies (for insulated lugs)
- Interchangeable MS90485-xx Dies (for un-insulated lugs)
- Interchangeable MS25442-xx Dies (for aluminum lugs)
The HD120 is a hand actuated hydraulic crimp tool designed to use interchangeable MS23002-XX dies (for insulated lugs), MS90485-XX dies (for un-insulated lugs) and MS25442-XX dies (for aluminum lugs). It has a two stage hydraulic system with automatic pressure relief to prevent over compression, and automatic die retraction after the crimp cycle.
This tool is a hand operated hydraulic equivalent to DMC tool part number TBHD1M (MS25441-1), 12 ton Hydraulic Installing Head. It accepts all dies designed for use in the TBHD1M, however, the HD120 is NOT Mil-Qualified.
The tool’s hydraulic pump is filled with biodegradable hydraulic fluid at the factory and does not need to be bled or primed.
Crimp Force: 12 tons (106kN)
Weight: 14.6lb (6.6kg)
Crimp Head: (L x W x H) 5.18in x 1.38in x 4.18in (131.6mm x 35.1mm x 106.2mm)
Overall Length : 21.3in (541mm)
Hydraulic Oil : .1pt (50ml) Biodegradable Hydraulic Fluid
Crimping Range: 8 AWG to 4/0 AWG
Limited Warranty / Limitation of Liability*
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.
Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.
To obtain an RMA, please contact our Sales Department at 407-855-6161 or firstname.lastname@example.org.
Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.
Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.