Electro-Mechanical Crimp Tool
EMC3300 Battery Powered Crimp Tool
• Advanced Ergonomic Tool Design with “Safe Distance” Trigger Closing Control
• Pre-Clamp Function to Improve Cycle-Time and Quality
• Crimp Cycle Time is 1.3 Seconds
• 250 Crimps per Charge
• Li-Ion 10.8 Volt Battery and Charger
• Built-in LED Light
• Data Retrieval Available
Tool kit consists of a molded case, one battery and charger.
EMC3300-230: Tool Kit with 220-240 Volt Charger and one battery
HDE-MBC110: 110-120 Volt Charger only
HDE-MBC230: 220-240 Volt Charger only
HDE-MBP108: 10.8V Battery only
HDE-USB: USB Adapter Module
Dies are sold separately.
EMC-101D: W, R, B, Y Insulated Spare Wire Caps
EMC-102D: R, B, Y Insulated Terminals
EMC-102DL: Same as EMC-102D plus Locator
EMC-106D: .042 sq, .128 hex, .178 hex
EMC-108D: .068 sq, .213 hex, .255 hex
EMC-117D: .128 hex, .178 hex, .213 hex, .255 hex
EMC-129D: M81824/1-X splices (comparable to M22520/37-01)
EMC-1005D: Uninsulated Terminals 10-22AWG (comparable to TE49935)
EMC-1006D: High Temp Uninsulated Terminals 10-22AWG (comparable to TE46447)
This tool can accommodate some die sets which are supplied by connector sources. Consult DMC for details.
Limited Warranty / Limitation of Liability*
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.
Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.
To obtain an RMA, please contact our Sales Department at 407-855-6161 or firstname.lastname@example.org.
Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.
Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.