MS21004-8 to -14,
Sizes 16 to 14 |
 |
(similar terminal shown)
Type: |
Class 1 Uninsulated Terminals, Rectangular Tongue |
Insulation: |
N/A |
Terminal Body & Sleeve: |
Copper, ASTM B-152 |
Plating: |
Tin, ASTM B-545 |
Max Temp Rating: |
175° C |
TOOL SELECTION GUIDE** |
TERMINAL SPECS |
DMC TOOL/DIE OPTIONS |
AWG |
WIRE SIZE
mm |
INSULATION DIAMETER INCHES (mm) |
SLEEVE COLOR |
TERMINAL / SPLICE PART NUMBER |
HX4 SERIES MULTI CAVITY
(ONE INDENT) |
HX4 SERIES MULTI CAVITY
(TWO INDENTS) |
GMT SERIES TOOL
(ONE INDENT) |
GMT SERIES TOOL
(TWO INDENTS) |
DCT4 SERIES TOOL |
| #16-14 |
1.04-2.62 |
N/A |
N/A |
MS21004- |
8 |
Y554 Die |
Y788 Die |
GMT277 |
GMT1005 |
DCT4-105D Die |
| 9 |
Y554 Die |
Y788 Die |
GMT277 |
GMT1005 |
DCT4-105D Die |
| 10 |
Y554 Die |
Y788 Die |
GMT277 |
GMT1005 |
DCT4-105D Die |
| 11 |
Y554 Die |
Y788 Die |
GMT277 |
GMT1005 |
DCT4-105D Die |
| 12 |
Y554 Die |
Y788 Die |
GMT277 |
GMT1005 |
DCT4-105D Die |
| 13 |
Y554 Die |
Y788 Die |
GMT277 |
GMT1005 |
DCT4-105D Die |
| 14 |
Y554 Die |
Y788 Die |
GMT277 |
GMT1005 |
DCT4-105D Die |
| **If MIL Approval is required, QPL status should be verified. Consult DMC for current status. |
TERMNAL MANUFACTURERS' PART NUMBER |
TERMINAL SPECS |
TERMINAL MANUFACTURERS' TERMINAL # |
AWG |
SLEEVE COLOR |
TERMINAL / SPLICE PART NUMBER |
BURNDY |
HOLLINGSWORTH |
MOLEX |
PANDUIT |
THOMAS & BETTS |
TYCO ELEC |
| #16-14 |
N/A |
MS21004- |
8 |
-- |
-- |
-- |
-- |
B486 |
-- |
| 9 |
-- |
-- |
-- |
-- |
B483 |
-- |
| 10 |
-- |
-- |
-- |
-- |
B482 |
-- |
| 11 |
-- |
-- |
-- |
-- |
B481 |
-- |
| 12 |
-- |
-- |
-- |
-- |
B485 |
-- |
| 13 |
-- |
-- |
-- |
-- |
B484 |
-- |
| 14 |
-- |
-- |
-- |
-- |
B480 |
-- |
| NOTE: Component manufactures’ and OEM instructions shall take precedence over the information presented in these charts. Wire ranges are for reference only. |
TOOLS AND DIES FOR CRIMPING TERMINALS AND SPLICES
DMC has several die configurations for crimping terminals and splices. AWG size is one determining factor, but each die configuration has a designated tool series. The hand tool is the basis of each tool series and suitable for the low volume of prototype or repair work. For higher volume production and intermediate/depot maintenance, a tool series might include pneumatic tools, hydraulic tools, battery hydraulic tools, or electric hydraulic tools.
NOTE: If MIL Approval is required, QPL status should be verified. Consult DMC for current status.
HX4 TOOL SERIES OPTIONS FOR Y-DIES |
 |
HX4 |
Hand Crimp Tool |
 |
UDT4 |
Upside Down Hand Crimp Tool |
 |
HXE4B |
Battery Hydraulic Crimp Tool |
 |
HX23 |
Pneumatic Crimp Tool |
GMT TOOL SERIES OPTIONS |
 |
GMTxxx |
Hand Crimp Tool |
 |
GMTExxxB |
Battery Hydraulic Crimp Tool |
 |
GMTExxx-R |
Remote Head Battery Hydraulic Crimp Tool |
DCT TOOL SERIES OPTIONS |
 |
DCT4 |
Hand Crimp Tool |
 |
DCTE4B |
Battery Hydraulic Crimp Tool |
|
