M7928/6-1 to -5,
Sizes 26 to 10 |
 |
(similar splice shown)
Type: |
Class 1 Insulated Splices, Radiation Resistant |
Insulation: |
Polyvinyldene Fluoride (PVF2) [Natural Color] |
Splice Body & Sleeve: |
Copper, ASTM B-152 |
Plating: |
Tin, ASTM B-545 |
Max Temp Rating: |
105° C |
TOOL SELECTION GUIDE** |
SPLICE SPECS |
DMC TOOL/DIE OPTION |
AWG |
WIRE SIZE
mm |
INSULATION DIAMETER INCHES (mm) |
SLEEVE COLOR |
TERMINAL / SPLICE PART NUMBER |
HX4 SERIES* |
M22520/40-01
TOOL*
|
| #26-24 |
0.12-0.24 |
.082 (2.08) |
Yellow Stripe |
M7928/6- |
1 |
Y527 Die |
AMT4001 |
| #24 -20 |
0.16-0.65 |
.100 (2.54) |
White Stripe |
M7928/6- |
2 |
Y527 Die |
AMT4001 |
| #22-18 |
0.26-0.96 |
.125 (3.18) |
Red Stripe |
M7928/6- |
3 |
Y501 Die |
AMT4001 |
| #16-14 |
1.04-2.62 |
.150 (3.81) |
Blue Stripe |
M7928/6- |
4 |
Y539 Die |
AMT4001 |
| #12-10 |
2.62-6.64 |
.220 (5.59) |
Yellow Stripe |
M7928/6- |
5 |
Y501 Die |
-- |
*MIL APPROVED.
**If MIL Approval is required, QPL status should be verified. Consult DMC for current status. |
SPLICE MANUFACTURERS' PART NUMBER |
SPLICE SPECS |
SPLICE MANUFCTURERS' SPLICE # |
AWG |
SLEEVE COLOR |
TERMINAL / SPLICE PART NUMBER |
BURNDY |
HOLLINGSWORTH |
MOLEX |
PANDUIT |
THOMAS & BETTS |
TYCO ELEC
(RAYCHEM)
|
| #26-24 |
Yellow Stripe |
M7928/6- |
1 |
-- |
-- |
-- |
-- |
-- |
53546-1 |
| #24 -20 |
White Stripe |
M7928/6- |
2 |
-- |
-- |
-- |
-- |
-- |
53547-1 |
| #22-18 |
Red Stripe |
M7928/6- |
3 |
-- |
-- |
-- |
-- |
-- |
53548-1 |
| #16-14 |
Blue Stripe |
M7928/6- |
4 |
-- |
-- |
-- |
-- |
-- |
53549-1 |
| #12-10 |
Yellow Stripe |
M7928/6- |
5 |
-- |
-- |
-- |
-- |
-- |
53550-1 |
NOTE: Component manufactures’ and OEM instructions shall take precedence over the information presented in these charts. Wire ranges are for reference only. |
TOOLS AND DIES FOR CRIMPING TERMINALS AND SPLICES
DMC has several die configurations for crimping terminals and splices. AWG size is one determining factor, but each die configuration has a designated tool series. The hand tool is the basis of each tool series and suitable for the low volume of prototype or repair work. For higher volume production and intermediate/depot maintenance, a tool series might include pneumatic tools, hydraulic tools, battery hydraulic tools, or electric hydraulic tools.
NOTE: If MIL Approval is required, QPL status should be verified. Consult DMC for current status.
HX4 TOOL SERIES OPTIONS FOR Y-DIES |
 |
HX4 |
Hand Crimp Tool |
 |
UDT4 |
Upside Down Hand Crimp Tool |
 |
HXE4B |
Battery Hydraulic Crimp Tool |
 |
HX23 |
Pneumatic Crimp Tool |
M22520/40-01 TOOL OPTIONS |
 |
AMT4001 |
Hand Crimp Tool |
|
